PAGE 34 Metor 6M
Installation and Operating Manual
8. CALIBRATION 92102916 REV 5
Affect of Hi Speed and Lo Speed parameters on interference attenuation
Choosing detection program
Detection programs of the Metor 6M are divided into three groups:
1. Metor Security Programs. The group contains detection programs that are
intended for general security use. The programs are designed to detect threat
items made of various alloys (magnetic or non-magnetic) or a combination of
alloys (magnetic and non-magnetic).
2. International Security Programs. This group contains detection programs that
are designed according to the requirements of various security organizations
and security standards.
3. Material Selective Programs. The third group contains material selective
detection programs that are suited pilferage applications and for applications
where a specific object(s) needs to be detected as well as security applications.
Guide for object speed response setting
SETTING OBJECT SPEED INTERFERENCE ATTENUATION
HI SPEED Fast moving objects
Highest Lowest
Fastest Slowest
H1 XX
H2 XX
LO SPEED Slowly moving objects
No effect
Fastest Slowest
L1 X
L2 X
1 METAL DETECTION
PARAMETERS
1.1 SENSITIVITIES
1.2 PROGRAM
To Next Page
Loading...