Metor 6M PAGE 35
Installation and Operating Manual
92102916 REV 5 8. CALIBRATION
The relative sensitivity of the Metor 6M detection programs are given in the table
next page. These programs have been compared to each other using factory set
sensitivity and zone sensitivity values.
Test conditions
• Settings: SE = 50, except in PG11 SE = 15
• Test place: middle of the WTMD
• Test objects: metal cylinders (dia. 40 mm): steel (Fe37), stainless steel
(AISI316), aluminium, copper, brass and lead.
NO DETECTION PROGRAM DESCRIPTION
METOR SECURITY PROGRAMS
01 MET1 For detection of hand guns
02 MET2 For detection of hand guns
03 MET3 For detection of hand gun parts
04 MET4 For detection of hand gun parts
INTERNATIONAL SECURITY PROGRAMS
10 NIJ1 NIJ Standard-0601.02 level 1
11 NIJ2 NIJ Standard-0601.02 level 2
12 EU1 EU Airport level 1
13 EU2 EU Airport level 2
14 US US Airport
MATERIAL SELECTIVE PROGRAMS
20 ALL METALS Selective to all metal types
21 MAGNETIC1 Selective to magnetic metals
22 MAGNETIC2 Selective to magnetic metals
23 NON-MAGNETIC1 Selective to non-magnetic metals and steels
24 NON-MAGNETIC2 Selective to non-magnetic metals and steels
To Next Page
Loading...