Metor 6M - Calibration Prerequisites

Metor 6M PAGE 29
Installation and Operating Manual
92102916 REV 5 7. SWITCHING ON
Super User Group Menu Structure
1 METAL DETECTION
PARAMETERS
1.1 SENSITIVITIES
1.1.1 SENSITIVITY
1.2 PROGRAM
1.3 FREQUENCY
1.5 COPY PARAMETERS
1.6 RESTORE FACTORY SETTINGS
2 AUDIO/VISUAL PARAMETERS
3 ACCESSIBILITY PARAMETERS
4 STATISTICS
3.1 USERS
3.2 REMOTE CONTROLS
4.1 COUNTER VALUES
4.2 COUNTER PARAMETERS
4.3 CLEAR STATISTICS
1.1.2 ZONE SENSITIVITITIES
1.5.1 COPY FROM
METOR => REMOTE
1.5.2 COPY FROM
REMOTE => METOR
1.5.3 SAVE CUSTOM PARAMETERS
1.5.4 LOAD CUSTOM PARAMETERS
2.1 VOLUME PARAMETERS
2.2 ALARM TONE
2.1.1 VOLUME
2.1.2 VOLUME MIN
2.4 ZONE DISPLAY PARAMETERS
2.4.1 ZONES
2.4.2 ZONE ON TIME
2.5 TRAFFIC LIGHT PARAMETERS
2.5.1 LIGHTS
2.6 DISPLAY MODE
2.5.2 RED ON TIME
3.1.1 ACCESS CODES
3.1.2 MANAGE USERS
3.1.1.1 CHANGE OWN ACCESS CODE
3.1.1.2 CHANGE USER N ACCESS CODE
3.1.2.1 ADD NEW USER
3.1.2.3 MODIFY USER
3.1.2.2 VIEW USERS
3.1.2.4 DELETE USER
3.1.3 USER GROUPS
3.3.2 KEYPAD DISABLE
3.1.3.1 GROUPS 2-8 ARE
3.1.3.2 DEFINE GROUP PRIVILEGES
3.1.3.3 VIEW GROUPS
3.1.3.4 RESET GROUPS 2-8
3.1.3.5 COPY USERS AND GROUPS
3.1.3.5.1 COPY FROM
METOR => REMOTE
3.1.3.5.2 COPY FROM
REMOTE => METOR
1.1.3 AUTO SENSITIVITY
1.3.1 SET FREQUENCY
1.3.2 SEARCH IN START-UP
2.1.3 KEY VOLUME
2.7 PWR INDICATION
2.8 READY VIOLATION
5.3.1 INPUT 1
5.3.2 INPUT 2
5.2 POWER RELATED PARAMETERS
1.4 FILTERS 1.4.1 LO SPEED
1.4.2 HI SPEED
2.3 ALARM ON TIME
3.3 LOGIN PARAMETERS 3.3.1 LOGIN TYPE
3.2.1 REMOVE ALL VALID REMOTES
5 GENERAL PARAMETERS
6 DIAGNOSTICS menu structure is
introduced in the chapter Diagnostics.
5.1 NETWORKING AND DATA
1.7 RANDOM ALARM PARAMETERS
1.7.1 RND RATE
1.7.2 RND/ALM RATE
1.7.3 RND TONE
1.8 CALIBRATION GUARD
1.8.1 GUARD MODE
1.8.2 SAVE CALIBRATION
1.8.3 LOAD CALIBRATION
1.7.4 RND VOLUME
1.7.5 RND DISPLAY
5.2.1 STANDBY MODE
5.2.2 POWER GUARD
1.1.4 AUTO FLOOR SENSITIVITY
5.4 DATE AND TIME
5.1.1 METORNET
1.1.2.1 ZONE 1
1.1.2.2 ZONE 2
1.1.2.3 ZONE 3
1.1.2.4 ZONE 4
1.1.2.5 ZONE 5
1.1.2.6 ZONE 6
1.1.2.7 ZONE 7
1.1.2.8 ZONE 8
1.1.2.9 ZONE 9
5.3 I/O CONFIG
4.1.1 PAX / ALM
4.1.2 ALARM RATE
4.1.3 NA / RA
4.1.4 ALM
RND / ALM
4.2.1 COUNT DIRECTION
4.2.2 DECREASE MODE
5.1.1.1 METORNET MODE
5.1.1.2 METORNET PORT
5.3.3 OUTPUT 1
5.4.1 YYY/MM/DD
HH:MM:SS
5.4.2 SET DATE
YYYY/MM/DD
5.4.3 SET TIME
HH:MM:SS
5.3.4 OUTPUT 2