Metor 6M PAGE 7
Installation and Operating Manual
92102916 REV 5 2. IMPORTANT INSTRUCTIONS
Use a damp cloth for cleaning the equipment. Do not use any chemicals or
liquid detergents.
The end user is responsible for the final calibration of the equipment for the
intended application. It is also the end user’s responsibility to regularly verify
calibration to the desired sensitivity level by using a suitable test object
/test objects.
If there is any reason to suspect that the security level of the equipment may
have deteriorated due to incorrect operation or external damage, the
equipment should be removed from operation and an authorized service
mechanic should be called in.
NOTICE
These symbols are used when it is important to follow the specified
instructions.
To Next Page
Loading...