Metrohm Titrando User Manual

1.2 Information about the Installation Instructions
4 Titrando Installation Instructions
1.2.2 Notation and pictograms
The following notation and pictograms are used in these Instructions:
9
Control element, instrument element
see illustrations in Section 1.3

Instruction
Carry out the instructions step by step.
[Continue]
Button
on the user interface
Danger
This symbol indicates a possible risk of
death or injury to the user and possible
damage to the instrument or its compo-
nents by electricity.
Warning
This symbol indicates a possible risk of
damage to the instrument or its compo-
nents if the given information is not properly
observed.
Attention
This symbol indicates important information
that you should read before continuing.
Information
This symbol indicates additional information
and tips that may be particularly useful.

Metrohm Titrando Specifications

General

mV Resolution	0.1 mV
Temperature Resolution	0.1 °C
Applications	Acid-base, redox, complexometric, precipitation, Karl Fischer titration
Measuring inputs	pH, mV, temperature
Stirrer control	Integrated stirrer control
Software	tiamo
Titration Methods	MET (Monotonic Equivalence Titration), SET (Fixed Equivalence Titration)
Dosing Resolution	Varies depending on the Dosing device used
Minimum Dosing Volume	Varies depending on the Dosing device used
pH Resolution	0.001
Interface	USB
Power Supply	100 – 240 V AC (depending on the model)
Dimensions	Varies depending on the model
Weight	Varies depending on the model