Metrohm Titrando - Cables for Balances

4 Appendix
Titrando Installation Instructions 53
Order no. Description
6.2151.030 USB cable for connecting the
USB-RS232 box to the control device (Ti-
trando, Dosing Interface, Sample Processor,
etc.)
(USB connection, type A)
USB A – USB B (30 cm)
6.2134.040 Cable for connecting a computer to the USB-
RS232 box
9 p./f – 9 p./f (3 m)
2.847.0010 847 USB Lab Link for connecting the Touch
Control to a computer network
4.3.14 Cables for balances
Order no. Description
6.2125.010 Adapter cable 25-pin to 9-pin
9 p./f – 25 p./m (30 cm)
6.2125.020 Cable for Mettler balances with interface 011
or 012 and AND-balances
25 p./f – 25 p./m (3 m)
6.2125.080 Cable for Precisa and Shimadzu balances
25 p./f – 25 p./m (2 m)
6.2134.060 Cable for Sartorius balances
25 p./m – 9 p./f (2 m)
6.2134.120 Cable for Mettler AX/MX/UMX/PG and
AB-S balances
9 p./f – 9 p./m (1.8 m)
6.2146.020 Cable for Mettler AT/AM/PM balances
25 p./m – Mettler plug (2 m)