Metrohm Titrando User Manual

4.2 Standard equipment
40 Titrando Installation Instructions
4.2 Standard equipment
Immediately upon receipt of the Titrando please check that the delivery
is complete. The illustrations in the accessory lists are not to the same
scale.
4.2.1 808 Titrando
The 808 Titrando is available in the 2 following versions:
• 2.808.0010 808 Titrando with one measuring interface
• 2.808.0020 808 Titrando with two galvanically separated
measuring interfaces
The information given in brackets refers to 2.808.0020.
No. Order No. Description
1 1.808.0010
or
1.808.0020
808 Titrando with one measuring interface
or
808 Titrando with two galvanically separated measuring interfaces
1 6.0262.100 Ecotrode Plus
Combined LL pH glass electrode with fixed ground-joint diaphragm
1 6.2104.020 Connection cable for Metrohm electrodes with plug head
length 1 m
1 6.2739.010 Key for exchange units
1 (2)
1 (2)
6.2103.130
6.2103.140
Adapter red
Adapter black
for temperature sensor
2 mm plug / 4 mm socket
1
6.2122.020
6.2122.040
6.2122.070
Mains cable (plug to customer’s specification)
Type SEV 12 (Switzerland)
Type CEE(7), VII (Germany,...)
Type NEMA/ASA (USA,...)
1 8.840.1133 Installation Instructions for Titrando

Metrohm Titrando Specifications

General

mV Resolution	0.1 mV
Temperature Resolution	0.1 °C
Applications	Acid-base, redox, complexometric, precipitation, Karl Fischer titration
Measuring inputs	pH, mV, temperature
Stirrer control	Integrated stirrer control
Software	tiamo
Titration Methods	MET (Monotonic Equivalence Titration), SET (Fixed Equivalence Titration)
Dosing Resolution	Varies depending on the Dosing device used
Minimum Dosing Volume	Varies depending on the Dosing device used
pH Resolution	0.001
Interface	USB
Power Supply	100 – 240 V AC (depending on the model)
Dimensions	Varies depending on the model
Weight	Varies depending on the model