Metrohm Titrando User Manual

2 Installation
Titrando Installation Instructions 25

Configure the Titrando / Dosing Interface in the device manager or
the configuration dialog as described in the Instructions for Use for
PC Control / Touch Control or tiamo respectively.
You can connect another Titrando or Dosing Interface in the manner
described above.
Attention!
Connecting Titrandos/Dosing Interfaces via a commercially available
USB hub is not possible.
2.5.5 Connecting a PC keyboard (Titrando with Touch Control only)
The PC keyboard is used as an aid for entering text and numbers. If you
are operating the Titrando with the Touch Control then you can connect
a PC keyboard with USB interface to the Titrando. Current keyboard
models that can be connected are listed on the Internet under
www.titrando.com
.

Connect the USB plug of the keyboard (type A) to one of the USB
sockets of the Titrando.

Switch on the Touch Control. The keyboard will be automatically
recognized and entered in the device manager.

Configure the keyboard in the device manager of the Touch Control
as described in the Instructions for Use for PC Control / Touch Con-
trol.
2.5.6 Connecting a barcode reader
The barcode reader is used as an aid for entering text and numbers.
You can connect a barcode reader with USB-interface. Current barcode
reader models that can be connected are listed on the Internet under
www.titrando.com
.
Operation with Touch Control

Connect the USB plug of the barcode reader (type A) to one of the
USB sockets of the Titrando.

Switch on the Touch Control. The barcode reader will be automati-
cally recognized and entered in the device manager of the Touch
Control.

Configure the barcode reader in the device manager as described
in the Instructions for Use for PC Control / Touch Control.
Operation with PC Control/tiamo

Connect the USB plug of the barcode reader (type A) to one of the
USB sockets of the Titrando or the computer.

Start the PC Control or tiamo software.

Configure the barcode reader in the device manager or the configu-
ration dialog as described in the Instructions for Use for PC Con-
trol / Touch Control or tiamo respectively.

Metrohm Titrando Specifications

General

mV Resolution	0.1 mV
Temperature Resolution	0.1 °C
Applications	Acid-base, redox, complexometric, precipitation, Karl Fischer titration
Measuring inputs	pH, mV, temperature
Stirrer control	Integrated stirrer control
Software	tiamo
Titration Methods	MET (Monotonic Equivalence Titration), SET (Fixed Equivalence Titration)
Dosing Resolution	Varies depending on the Dosing device used
Minimum Dosing Volume	Varies depending on the Dosing device used
pH Resolution	0.001
Interface	USB
Power Supply	100 – 240 V AC (depending on the model)
Dimensions	Varies depending on the model
Weight	Varies depending on the model