Metrohm Titrando User Manual

1 Introduction
Titrando Installation Instructions 3
1.2 Information about the Installation Instructions
Attention!
Please study these Installation Instructions carefully before you start to
use the Titrando. The instructions contain information and warnings
that must be observed by the user in order to guarantee the safe use
of the instrument. Please keep these instructions near the instrument
so that they are always to hand when required.
1.2.1 Organization
These Installation Instructions for the Titrandos provide you with a com-
prehensive overview of the installation, startup, troubleshooting and
technical specifications of the instruments.
The Installation Instructions are arranged as follows:
Introduction
General description of the instrument, operating elements and safety in-
formation
Installation
Installation of the instrument, connection of the peripheral devices and
accessories
Troubleshooting
Description of possible errors and how to remedy them
Appendix
Technical data, standard equipment, optional accessories, warranty
and declaration of conformity
Index
In order to find the information you require about the Titrando you
should either use the Table of contents or the Index.

Metrohm Titrando Specifications

General

mV Resolution	0.1 mV
Temperature Resolution	0.1 °C
Applications	Acid-base, redox, complexometric, precipitation, Karl Fischer titration
Measuring inputs	pH, mV, temperature
Stirrer control	Integrated stirrer control
Software	tiamo
Titration Methods	MET (Monotonic Equivalence Titration), SET (Fixed Equivalence Titration)
Dosing Resolution	Varies depending on the Dosing device used
Minimum Dosing Volume	Varies depending on the Dosing device used
pH Resolution	0.001
Interface	USB
Power Supply	100 – 240 V AC (depending on the model)
Dimensions	Varies depending on the model
Weight	Varies depending on the model