Metrohm Titrando User Manual

2.5 Device connection at the USB
24 Titrando Installation Instructions
2.5.3 Connecting a USB Sample Processor / Robotic Titrosampler
A USB Sample Processor or a Robotic Titrosampler can be controlled
by Touch Control or PC Control/tiamo.

Use the 6.2151.000 cable to connect the USB connection of the Ti-
trando (type A) with the controller socket of the USB Sample Proc-
essors / Robotic Titrosampler.
Fig. 16: Titrando –USB Sample Processor

Start the PC Control/tiamo software or switch on the Touch Control.
The USB Sample Processor / Robotic Titrosampler will be recog-
nized automatically and entered in the device list of PC Con-
trol/tiamo or Touch Control.

Configure the USB Sample Processor / Robotic Titrosampler in the
device manager or the configuration dialog as described in the In-
structions for Use for PC Control / Touch Control or tiamo respec-
tively.
2.5.4 Connecting additional Titrandos or Dosing Interfaces
With the Touch Control or the PC Control software you can control up to
three Titrandos or Dosing Interfaces. The tiamo software allows to ex-
pand the system with practically any number of control devices.

Use the 6.2151.000 cable to connect the USB connection of the first
Titrando / Dosing Interface (type A) with the controller socket of the
second Titrando / Dosing Interface.
Fig. 17: Titrando – Titrando/Dosing Interface

Switch on the Touch Control or start the PC Control/tiamo software.
The Titrando / Dosing Interface will be recognized automatically and
entered in the device list of PC Control/tiamo or Touch Control.

Metrohm Titrando Specifications

General

mV Resolution	0.1 mV
Temperature Resolution	0.1 °C
Applications	Acid-base, redox, complexometric, precipitation, Karl Fischer titration
Measuring inputs	pH, mV, temperature
Stirrer control	Integrated stirrer control
Software	tiamo
Titration Methods	MET (Monotonic Equivalence Titration), SET (Fixed Equivalence Titration)
Dosing Resolution	Varies depending on the Dosing device used
Minimum Dosing Volume	Varies depending on the Dosing device used
pH Resolution	0.001
Interface	USB
Power Supply	100 – 240 V AC (depending on the model)
Dimensions	Varies depending on the model
Weight	Varies depending on the model