Metrohm Titrando User Manual

4.2 Standard equipment
46 Titrando Installation Instructions
4.2.7 857 Titrando
The 857 Titrando is available in the 2 following versions:
• 2.857.0010 857 Titrando with one measuring interface for 854
iConnect
• 2.857.0020 857 Titrando with two galvanically separated
measuring interfaces (one for 854 iConnect, one for
854 iConnect and conventional sensors)
The information given in brackets refers to 2.857.0020.
No. Order no. Description
1 1.857.0010
or
1.857.0020
857 Titrando with one measuring interface
or
857 Titrando with two galvanically separated measuring interfaces
1 1.854.0010 854 iConnect
measuring input
2 6.2043.005 Holding clip for bottle
1
1
6.2103.130
6.2103.140
for 2.857.0020 only:
Adapter red
Adapter black
for temperature sensor
2 mm plug / 4 mm socket
1
6.2122.020
6.2122.040
6.2122.070
Mains cable (plug to customer’s specification)
Type SEV 12 (Switzerland)
Type CEE(7), VII (Germany,...)
Type NEMA/ASA (USA,...)
1 8.840.1133 Installation Instructions for Titrando

Metrohm Titrando Specifications

General

mV Resolution	0.1 mV
Temperature Resolution	0.1 °C
Applications	Acid-base, redox, complexometric, precipitation, Karl Fischer titration
Measuring inputs	pH, mV, temperature
Stirrer control	Integrated stirrer control
Software	tiamo
Titration Methods	MET (Monotonic Equivalence Titration), SET (Fixed Equivalence Titration)
Dosing Resolution	Varies depending on the Dosing device used
Minimum Dosing Volume	Varies depending on the Dosing device used
pH Resolution	0.001
Interface	USB
Power Supply	100 – 240 V AC (depending on the model)
Dimensions	Varies depending on the model
Weight	Varies depending on the model