4.3 Additional instruments and optional accessories
52 Titrando Installation Instructions
4.3.12 Cables for electrodes and other accessories
Order no. Description
6.2104.020 Connection cable for Metrohm electrodes with plug head, length 1 m
6.2104.030 Connection cable for Metrohm electrodes with plug head, length 2 m
6.2104.140 Connection cable for resistance thermometer with 2 mm-plug, length 1 m
6.2104.150 Connection cable for resistance thermometer with 2 mm-plug, length 2 m
6.2106.020 Connection cable for reference electrodes, length 1 m
6.2106.060 Connection cable for reference electrodes, length 2 m
6.5104.030 Differential amplifier, 230 V Euro
for measurements in poorly conducting solutions
6.5104.040 Differential amplifier, 115 V USA
for measurements in poorly conducting solutions
4.3.13 Communication
Order no. Description
6.2151.000 Cable for connecting the control device (Ti-
trando, Dosing Interface, Sample Processor,
etc.) to a PC (USB connection, type A) and
for connecting additional control devices
USB A – Controller (1.8 m)
6.2151.020 USB cable for connecting a printer (USB
connection, type B) to the control device (Ti-
trando, Dosing Interface, Sample Processor,
etc.) (USB connection, type A)
USB A – USB B (1.8 m)
6.2148.010 Remote box MSB
for connecting devices controlled by remote
lines (e. g. Sample changer)
6.2148.020 RS232 box USB (USB-RS232 box)
for connecting devices with a serial RS232
interface (e. g. balances) to the USB connec-
tion of the control device (Titrando, Dosing
Interface, Sample Processor, etc.)
To Next Page
Loading...
