Metrohm Titrando User Manual

2 Installation
Titrando Installation Instructions 9
2 Installation
This section describes what you should pay attention to when unpack-
ing and setting up the Titrando. It also informs you about how a com-
plete titration system – from a simple system with stirrer and printer up
to a complicated system with additional dosing devices, sample
changer and balance – is assembled.
The following illustration provides an overview of the peripheral devices
that can be connected to a Titrando:
Fig. 5: Titrando – Peripheral devices

Metrohm Titrando Specifications

General

mV Resolution	0.1 mV
Temperature Resolution	0.1 °C
Applications	Acid-base, redox, complexometric, precipitation, Karl Fischer titration
Measuring inputs	pH, mV, temperature
Stirrer control	Integrated stirrer control
Software	tiamo
Titration Methods	MET (Monotonic Equivalence Titration), SET (Fixed Equivalence Titration)
Dosing Resolution	Varies depending on the Dosing device used
Minimum Dosing Volume	Varies depending on the Dosing device used
pH Resolution	0.001
Interface	USB
Power Supply	100 – 240 V AC (depending on the model)
Dimensions	Varies depending on the model
Weight	Varies depending on the model