Metrohm Titrando User Manual

4.3 Additional instruments and optional accessories
50 Titrando Installation Instructions
4.3.6 Combined pH electrodes
Order no. Description
6.0262.100 Ecotrode Plus
Combined LL pH glass electrode with fixed ground-joint diaphragm
6.0256.100 Flat membrane electrode
Combined LL pH glass electrode with fixed ground-joint diaphragm, for low
immersion depths
6.0229.100 Solvotrode
combined LL pH glass electrode
ground diaphragm (PCTFE), reference electrolyte LiCl saturated in EtOH
6.0253.100 Aquatrode plus
combined LL pH glass electrode
6.0255.100 Profitrode
Combined LL pH glass electrode with ground diaphragm, double junction
6.0258.010 Unitrode with Pt1000 temperature sensor (2 mm plug), plug F
6.0259.100 Unitrode without temperature sensor
4.3.7 Combined metal electrodes
Order no. Description
6.0430.100 Ag Titrode
6.0431.100 Pt Titrode
6.0450.100 Combined Ag ring electrode
6.0451.100 Combined Pt ring electrode
6.0452.100 Combined Au ring electrode
4.3.8 Ion-sensitive electrodes and surfactant electrodes
Order no. Description
6.0502.140 Ion-sensitive electrode for Cu
2+
6.0502.150 Ion- sensitive electrode for F
-
6.0508.110 Ion- sensitive electrode for Ca
2+
6.0507.010 NIO surfactant electrode for nonionic surfactants

Metrohm Titrando Specifications

General

mV Resolution	0.1 mV
Temperature Resolution	0.1 °C
Applications	Acid-base, redox, complexometric, precipitation, Karl Fischer titration
Measuring inputs	pH, mV, temperature
Stirrer control	Integrated stirrer control
Software	tiamo
Titration Methods	MET (Monotonic Equivalence Titration), SET (Fixed Equivalence Titration)
Dosing Resolution	Varies depending on the Dosing device used
Minimum Dosing Volume	Varies depending on the Dosing device used
pH Resolution	0.001
Interface	USB
Power Supply	100 – 240 V AC (depending on the model)
Dimensions	Varies depending on the model
Weight	Varies depending on the model