Metrohm Titrando User Manual

4 Appendix
Titrando Installation Instructions 51
Order no. Description
6.0507.120 "Ionic Surfactant" electrode for ionic surfactants
6.0507.130 Surfactrode Resistant for ionic surfactants
6.0507.140 Surfactrode Refill for ionic surfactants
6.0507.150 "Cationic Surfactant" electrode for ionic surfactants
4.3.9 Karl Fischer electrodes
Order no. Description
6.0338.100 Double platinum electrode
4.3.10 Reference electrodes
Order no. Description
6.0726.100 Ag/AgCl reference electrode with ground-joint diaphragm
6.0726.107 Ag/AgCl reference electrode filled with c(KCl)=3 mol/L,
with ground-joint diaphragm
6.0726.108 Ag/AgCl reference electrode filled with LiCl sat. in ethanol
with ground diaphragm
6.0750.100 LL ISE Reference
Ag/AgCl reference electrode with fixed ground-joint diaphragm, bridge elec-
trolyte c(KCl) = 3 mol/L, length 133 mm, with Metrohm socket B
4.3.11 Temperature sensors
Order no. Description
6.1110.100 Pt1000 resistance thermometer
6.2103.130 Adapter red
for temperature sensor
2 mm plug / 4 mm socket
6.2103.140 Adapter black
for temperature sensor
2 mm plug / 4 mm socket

Metrohm Titrando Specifications

General

mV Resolution	0.1 mV
Temperature Resolution	0.1 °C
Applications	Acid-base, redox, complexometric, precipitation, Karl Fischer titration
Measuring inputs	pH, mV, temperature
Stirrer control	Integrated stirrer control
Software	tiamo
Titration Methods	MET (Monotonic Equivalence Titration), SET (Fixed Equivalence Titration)
Dosing Resolution	Varies depending on the Dosing device used
Minimum Dosing Volume	Varies depending on the Dosing device used
pH Resolution	0.001
Interface	USB
Power Supply	100 – 240 V AC (depending on the model)
Dimensions	Varies depending on the model
Weight	Varies depending on the model