Metrohm Titrando User Manual

4 Appendix
Titrando Installation Instructions 39
4.1.12 Dimensions
Titrando with internal dosing drive
Housing material Polybutylene terephthalate (PBT)
Width
Height (without exch. unit)
Height (with exch. unit)
Depth
142 mm
164 mm
approx. 450 mm
239 mm
Weight (without exch. unit) 2948 g
Titrando without internal dosing drive
Housing material Polybutylene terephthalate (PBT)
Width
Height
Depth
142 mm
227 mm
231 mm
Weight 2817 g
4.1.13 Recycling and disposal
This product is covered by European Directive 2002/96/EC, WEEE – Waste
from Electrical and Electronic Equipment.
The correct disposal of your old equipment will help to prevent negative
effects on the environment and public health.
More details about the disposal of your old equipment can be obtained
from your local authorities, from waste disposal companies or from your
local dealer.

Metrohm Titrando Specifications

General

mV Resolution	0.1 mV
Temperature Resolution	0.1 °C
Applications	Acid-base, redox, complexometric, precipitation, Karl Fischer titration
Measuring inputs	pH, mV, temperature
Stirrer control	Integrated stirrer control
Software	tiamo
Titration Methods	MET (Monotonic Equivalence Titration), SET (Fixed Equivalence Titration)
Dosing Resolution	Varies depending on the Dosing device used
Minimum Dosing Volume	Varies depending on the Dosing device used
pH Resolution	0.001
Interface	USB
Power Supply	100 – 240 V AC (depending on the model)
Dimensions	Varies depending on the model
Weight	Varies depending on the model