Metrohm Titrando User Manual

2.1 Overview
10 Titrando Installation Instructions
2.1 Overview
The following flow diagram provides an overview of the installation of a
simple titration system with stirrer, external dosing device, printer and
balance. More detailed information can be found in the given sections.
Setup Section 2.2
Touch Control/Computer connection Section 2.3
Stirrer/Titration stand connection Section 2.4.1
Dosing device connection Section 2.4.2 and 2.4.3
Printer connection Section 2.5.1
Balance connection Section 2.5.2

Metrohm Titrando Specifications

General

mV Resolution	0.1 mV
Temperature Resolution	0.1 °C
Applications	Acid-base, redox, complexometric, precipitation, Karl Fischer titration
Measuring inputs	pH, mV, temperature
Stirrer control	Integrated stirrer control
Software	tiamo
Titration Methods	MET (Monotonic Equivalence Titration), SET (Fixed Equivalence Titration)
Dosing Resolution	Varies depending on the Dosing device used
Minimum Dosing Volume	Varies depending on the Dosing device used
pH Resolution	0.001
Interface	USB
Power Supply	100 – 240 V AC (depending on the model)
Dimensions	Varies depending on the model
Weight	Varies depending on the model