Metrohm Titrando User Manual

4 Appendix
Titrando Installation Instructions 45
4.2.6 842 Titrando
The 842 Titrando is available in the following version:
• 2.842.0010 842 Titrando with one measuring interface
No. Order no. Description
1 1.842.0010 842 Titrando with one measuring interface
1 6.0262.100 Ecotrode Plus
Combined LL pH glass electrode with fixed ground-joint diaphragm
1 6.2104.020 Connection cable for Metrohm electrodes with plug head
length 1 m
2 6.2043.005 Holding clip for bottle
1
1
6.2103.130
6.2103.140
Adapter red
Adapter black
for temperature sensor
2 mm plug / 4 mm socket
1
6.2122.020
6.2122.040
6.2122.070
Mains cable (plug to customer’s specification)
Type SEV 12 (Switzerland)
Type CEE(7), VII (Germany,...)
Type NEMA/ASA (USA,...)
1 8.840.1133 Installation Instructions for Titrando

Metrohm Titrando Specifications

General

mV Resolution	0.1 mV
Temperature Resolution	0.1 °C
Applications	Acid-base, redox, complexometric, precipitation, Karl Fischer titration
Measuring inputs	pH, mV, temperature
Stirrer control	Integrated stirrer control
Software	tiamo
Titration Methods	MET (Monotonic Equivalence Titration), SET (Fixed Equivalence Titration)
Dosing Resolution	Varies depending on the Dosing device used
Minimum Dosing Volume	Varies depending on the Dosing device used
pH Resolution	0.001
Interface	USB
Power Supply	100 – 240 V AC (depending on the model)
Dimensions	Varies depending on the model
Weight	Varies depending on the model