Metrohm Titrando User Manual

2 Installation
Titrando Installation Instructions 17
"Status" LED Dosing device operating status
off There is no exchange unit at-
tached.
constant illumination The Titrando is ready for dosing
or titrating. The exchange unit
has been attached correctly and
recognized and is now in the
change position, i. e. the ex-
change unit can be removed.
blinks slowly The Titrando is currently dosing
or filling or the exchange unit is
not in the change position.
An intelligent 806 Exchange unit
has been attached and the data
on the built-in data chip is cur-
rently being read out or written.
blinks rapidly Dosing drive error (see Sec-
tion 3, Troubleshooting)

Metrohm Titrando Specifications

General

mV Resolution	0.1 mV
Temperature Resolution	0.1 °C
Applications	Acid-base, redox, complexometric, precipitation, Karl Fischer titration
Measuring inputs	pH, mV, temperature
Stirrer control	Integrated stirrer control
Software	tiamo
Titration Methods	MET (Monotonic Equivalence Titration), SET (Fixed Equivalence Titration)
Dosing Resolution	Varies depending on the Dosing device used
Minimum Dosing Volume	Varies depending on the Dosing device used
pH Resolution	0.001
Interface	USB
Power Supply	100 – 240 V AC (depending on the model)
Dimensions	Varies depending on the model
Weight	Varies depending on the model