Metrohm Titrando User Manual

2.5 Device connection at the USB
28 Titrando Installation Instructions
tooth serial adapter, this should be used instead of a commercially
available adapter.
Bluetooth serial adapters must be configured on the PC using the utility
program supplied by the manufacturer. The data transfer parameters of
instrument and adapter must agree with each other. The Bluetooth se-
rial adapter must be defined as Acceptor and not as Initiator of a serial
connection. Authentication with a PIN code is not supported.

Metrohm Titrando Specifications

General

mV Resolution	0.1 mV
Temperature Resolution	0.1 °C
Applications	Acid-base, redox, complexometric, precipitation, Karl Fischer titration
Measuring inputs	pH, mV, temperature
Stirrer control	Integrated stirrer control
Software	tiamo
Titration Methods	MET (Monotonic Equivalence Titration), SET (Fixed Equivalence Titration)
Dosing Resolution	Varies depending on the Dosing device used
Minimum Dosing Volume	Varies depending on the Dosing device used
pH Resolution	0.001
Interface	USB
Power Supply	100 – 240 V AC (depending on the model)
Dimensions	Varies depending on the model
Weight	Varies depending on the model