101
REAR EXHAUST
To take out the back exhaust line, put the car on
an elevator
Take out the back bumper (see page 23).
Take out the 2 back wheels
Take out the 2 fixing nuts of the back axle
(set screw when fitting back)) and make the axle drop
to the front.
Untighten the 2 fixing nuts of the front collar.
Take out the tube and the silencer of the rubber mounting
and take out the exhast line taking it to the back.
The fitting operations are made at the reverse from
the removal operations.
To Next Page
Loading...
Need help?
General
