27
Take out partly the joint of the door.
Take out the trim and take out the belt and the beam.
The fitting is made at the reverse from the removal operations
SAFETY BELT RETRACTOR
REMOVAL
Take out the interior trim (see page 25).
Take out the fixing screw of the safety belt retractor
(set screw when fitting back 35 N/m).
CHANGING OF THE
INTERIOR ROOF TRIM
With a Stanley knife, make 2 cuts on the front part
of the roof trim.
Use the 2 cuts to take the roof in an easy way and to remove
the front trim.
Take totally out the roof trim taking it up to the front.
Remove a maximum of glue in the corners of the roof
to position easier the new trim.
To Next Page
Loading...
Need help?
General
