Microcar MC1 User Manual

94
BACK HUB
BEARING CHANGE
Put the car on an elevator
Take off the back wheel
(set screw 60N/m)
Take out the brake pads (see page 88)
WIth a 6 sides key, take out the 2 fixing screw of the
back caliper.
Take out the caliper of the disc.
Take out the central fixing of the hub
Set screw when fitting back 120N/m)
With a hub puller, take out the back hub
Replace the bearings
The fitting back is made at the reverse from the removal
operations.

Microcar MC1 Specifications

General

Brand	Microcar
Model	MC1
Category	Automobile
Language	English