Microcar MC1 User Manual

75
ENGINE REMOVAL
Unplug the battery using the speed red (+)disconnecting cable
terminal.
Take out the front bumper (see page 19).
Take out the soundproof engine panel
(see page 58).
Take out the front cross beam (2 fixing screws) and the engine
hold cable.
Take out the power pulley and the belt (see page 62).
Take out the throttle cable.
Find and take out the 2 fuel feed hoses
Fix the engine with a hoist or a workshop crane.
Uncouple the engine from the changer bridge.
(2 fixing screws).
Take out the fixing screws of the engine on the front
front rubber mounting.
Take out the engine of its place.
Drain the cooling system at the level of the
radiator inside hose.
Take out the 2 heating tubes
Take out the 3 cooling hoses
Unplug all the electric feeds
Uncouple the tube from the exhaust
manifold.
Take out the fixing screw of the exhaust
tube on the engine housing.

Microcar MC1 Specifications

General

Brand	Microcar
Model	MC1
Category	Automobile
Language	English