54
FLOOR REPAIRING
The floor material(Sandwiform) is made with a cellular
plate (A) (smocking) recovered with 2 Twintex sheets
(B) and 1 of it is recovered with a finishing carpet inside.
In case of shock or break, it is necessary to make the
repairing as said above.
Pre cut the Twintex sheet outside (without
carpet) ~ 4 cm around the damaged part.
Avoid cutting the smocking.
Take off and cut the damaged Twintex sheet.
Charge the smocking with the Sandwiform with the glue kit
réf. 1 002 657.
The rigidity of the part won't be ensured with
the repairing glue kit.
Cut a piece of Twintex sheet (ref 1002806)
Flame the side which is to glue (the smoother)
For any gluing on the sandwiform, it is necessary to
flame the parts which are to glue.
Without flaming, the gluing won't work on the twintex.
B
B
B
To Next Page
Loading...
