Microcar MC1 User Manual

61
TRANSMISSION GAITER CHANGE
Remove the fixing gaiter collars.
Drag the gaiter on the shaft to free the joint.
Separate the fixing circlips from the transmission shaft.
Take out the gaiter.
After having greased the joint and fitted a new gaiter, fit all back
at the reverse from the removal operations.
The 2 transmission gaiters are not identical, respect the
fitting way (see drawing below)
Wheel Side
Reverser axle side

Microcar MC1 Specifications

General

Brand	Microcar
Model	MC1
Category	Automobile
Language	English