11
CENTRAL LOCKING ENGINE
Tha nks to a drilling machine (drill Ø 5) take out the 2 rivets of
the fixing of the central locking engine mounting plate.
Take out the plate and engine and unplug the electric
beam.
Take off the 2 engine fixing screws.
DOOR POCKET
Withe a screwdriver, take off the 3 black plastic rivets
and take out the door pocket.
DOOR WINDOW
Take out the 4 fixing screws of the door frame, 2 screws at the front
and 2 at the back.
To take out the door window, it is better that it goes up
at the maximum.
To Next Page
Loading...