53
Inside,fill in again the break using the ABS repairing kit (D)
apply the Kalico fiber (B) on the glue to reinforce the repairing.
Drying time : 3 hours
After drying :
Take off the sticky strip outside and sand the repairing
to obtain the original form of the part.
Apply a body finishing mastic, to fill in the scratches cased by
the sanding.
Make a finishing sanding.
ALU REPAIRING
Clean and degrease the aluminium parts to repair.
Apply a specific alu mastic for the repairing.
To Next Page
Loading...
