19
FRONT BUMPER REMOVAL
Open the bonnet and take out the superior soundproofing.
Thanks to a screwdriver, take out the 2 black plastic rivets
inferior fixing.
Take out the 2 black plastic rivets from the wings
Fall over the bumper to the front and make it turn around its
superior fixing pegs on the sealed beam units.
Take the bumper out of the superior fixing pegs.
Use the flexibility of the ABS bumper to make this operation.
Do not force or break the centring pegs of the
sealed beam units.
The fitting of the bumper is made at the reverse from
the removal operations.
To Next Page
Loading...
Need help?
General
