Microcar MC1 User Manual

26
Take out the superior fixing screw, inking belt.
(set screw when reassembly 35 N/m).
Take the 2 fixing screws out of the bench seat support.
(set screw when reassembly 10 N/m).
With a screwdriver, take out the plastic cover of the inferior catch
of the belt.
Rise up lightly the bench seat and take out the screw of the inferior
catch of the belt.
(set screw when fitting back 35 N/m).
Take the joint out of the rear door.

Microcar MC1 Specifications

General

Brand	Microcar
Model	MC1
Category	Automobile
Language	English