24
OPENING HATCHBACK
SWITCH REMOVAL
Bumper removal (see page 23).
Take out the 2 fixing screws of the hatchback lock with its 2
spacer rings.
(set screw when fitting 5 N/m).
Take the cable out of the lock.
WIth a drilling machine (drill Ø 5) take the 2 fixing rivets out of
bumper support, undo the duct from the switch cable
and take the support out.
Take out the 2 fixing screws of the hatchback opening
switch.
Take the switch out of its place.
To Next Page
Loading...
