43
Fit the inside door mirror on its support.
Clean all the glue residues which stay on the body.
Apply the ABS primary (ref 1002818) on the upper part of the
apron cover.
Alll the alu surfaces which must be glued will have to be degreased with the
product in the kit (ref 1002659).
Use the glue kit (ref 0700200)
Apply the primary all around the windcreen level with the joints.
Apply a line of glue on the primary and fit back the windscreen.
Check its well centring on the body, hold it in pressure in its definitive
position and stop the car during the 6 following hours.
To Next Page
Loading...
Need help?
General
