89
Take off the 2 brake pads
• Control the waterproofness of the piston and the good condition of the brake caliper
and the weak of the discs (the thickness of the discs must be between 4 to 5mm on the front
and 3 to 4mm at the back). Below these sizes, the discs must be replaced immediately.
• Set some new pads
• Fit back at the reverse from the removal operations
• Press several times on the brake pedal
• Control and complete the level of the necessary brake liquid, do the bleed of the brake.
To Next Page
Loading...
Need help?
General
