Witty User Manual - EN - v1.5 P. 126 / 171
60-Meter Sprint with Lap Time after 10 Meters and 30 Meters.
Enter the Start-Stop Base as in the previous
example.
Then press <F3> to add the Lap1 Base and enter the
distance.
Do the same for the Lap2 and Lap3 bases.
Remember to SAVE by pressing <F1>.
You can move around in the table to change the
distance of a previously added Base.
To delete one or more bases, press <F2> to reset
the list and enter new data.
To Next Page
Loading...
