Witty User Manual - EN - v1.5 P. 71 / 171
4.4.4 AUTONOMOUS SEQUENCE
The purpose of the test is to turn on a symbol (e.g. an arrow) on the traffic light within a defined period of
time. Generally, only one traffic light is used in order to make the athlete perform specific actions according
to the symbol displayed. If several colours are used, the difficulty can be increased by providing other tasks
(e.g. if the arrow is green, jump in that direction, if it is red jump on the opposite side). The test continues
endlessly until another type of test is chosen or the WittySEM are turned off.
Example 1: an athlete balancing on the Bosu Ball faces a WittySEM, which indicates whether to jump down
from the equipment in the direction shown by the arrow.
Period: Insert in tenths of a second the time during which the WittySEM turns
on the chosen symbol
Display Duration Insert in tenths of a second the time the traffic light stays on in the set
period
Symbols It indicates whether to use Arrows, Letters or Numbers
Colours It indicates whether to use only the colour Red, two colours (Red/Green)
or three colours (Red/Green/Blue). In the case of several colours, the
symbols will turn on randomly in one colour or the other.
By setting the period to 5 seconds (50 tenths) and the display period to 2 seconds, we will achieve this effect:
To Next Page
Loading...
