Microgate WITTY - LED Statuses and Colours

Witty User Manual - EN - v1.5 P. 29 / 171
2.6.2 LED STATUSES AND COLOURS
FRONT LEDS
STATUS
STATUS LED
• Bracelet with bib number
detected
Green
• Bracelet without bib
number detected or
scanning error
Red
• Non RFID obstacle
detected
Blue
REAR LED
Witty·RFID OFF
STATUS
STATUS LED
• Battery charged/empty
Off
• External power supply
• Battery charging
Orange blinking light
• External power supply
• Battery charging
completed
Green steady light
Witty·RFID ON
STATUS
STATUS LED
NORMAL mode
• Battery charged
• Battery empty
Green - Pause
Red - Pause
BOOTLOADER Mode
• Witty·RFID has not been switched on pressing the ON/OFF
button but by connecting the USB cable to a PC. This
activates the BootLoader HID and the firmware can be
updated.
Red - Green
CONFIGURATION mode
• When switching on, the ON/OFF button is pressed for at
least 5 seconds and configuration mode is activated
Red blinking light