Microgate WITTY - Page 44

Witty User Manual - EN - v1.5 P. 44 / 171
5 4 3 2 1 ▓…wait 35 seconds (45 – 5 for the countdown – 5 for the
green) and restart
Example 2: Start every 30 seconds, with a 3 second countdown and generation of the start impulse (the
start photocells is not required)
STOP
Should be < T
repet.
sec.
The traffic light is in stand-by with its index displayed in blue
A
The first traffic light start takes place manually by pressing the button <F1> Start Traffic Light
Witty·SEM carries out the selected countdown (5 sec.) and then immediately displays the green signal for 5
seconds.