Witty User Manual - EN - v1.5 P. 47 / 171
The parameter Start mode can be used to display a different signal from standard as the “start” semaphore
signal where all the LEDS (green) turn on.
The parameter values possible are:
█ all LEDs on (default)
◄► right/left arrow
◄►▲▼ right/left/up/down arrow
A B letter A or B
A B C letter A or B or C
This way, before starting, the athlete can be assigned a “task” according to the symbol that appears by chance
(e.g. “when the semaphore comes on the athlete starts, but sprints from right to left depending on the arrow”,
or “when the semaphore comes on the athlete starts, but if A appears he/she does a certain exercise, if B
appears, he/she does another”, etc.)
To Next Page
Loading...
