Witty User Manual - EN - v1.5 P. 75 / 171
Common Parameters
There are a number of parameters that are common to all the tests and are going to be described here,
avoiding doing it on a case-by-case basis.
Repetitions Number: This is the number of times that the proposed exercise will have to be
executed
Positioning Time This is the time that we want to give our user to go back into the starting
position (usually in front of the Witty Frame or the tripods) ready to
switch off the next semaphore. If we have given an “accessory
movement" between one exercise and the next (jump, juggle, specific
action), then this parameter will be increased accordingly. The default is
3 seconds.
Level Every test has a set of parameters that, when combined together, can
give rise to an infinite number of variations. To simplify management,
we have decided on 5 pre-set levels for each test, according to our
experience, in order of difficulty (very easy, easy, medium, hard, very
hard). The level named "Custom" is however always available where you
decide each parameter and then create a completely customized test
according to your tastes and needs.
If we choose the "Custom" level we can change another two parameters called "Start Time" and "Minimum
Time".
Start Time The tests always begin with a "Start Time" (usually 1 sec.), which will
then increase or decrease up to the value set in the "Minimum Time”
parameter.
To Next Page
Loading...
