AccuPyc II 1340 Appendix D
Nov 06 D-1
D. TRANSMITTED DATA
Analysis and calibration data can be transmitted in a single-column or spreadsheet format. The
data are in ASCII-delimited format. Spreadsheet format is suitable for direct import into many
popular spreadsheets (using serial communication software). The following tables define the
formats.
In all tables, units are as follows:
Analysis Report
Table D-1. Analysis Report - Single Column
Date DD/MM/YY
Time HH:MM:SS
Pressure psig
Temperature ºC
Elapsed Time seconds
Record
Number
Information Conveyed Form
1 Version number 20 characters
2 Serial number 1 integer
3 Report type = analysis 8 characters
4Start
4a Date 8 characters
4b Time 8 characters
5Stop
5a Date 8 characters
5b Time 8 characters
6 Ending temperature 1 floating point
7 Description line 1 20 characters
8 Description line 2 20 characters
9 Sample ID 20 characters
10 Sample mass 1 floating point
11 Number of purges 1 integer
12 Equilibration rate 1 floating point
To Next Page
Loading...
