AccuPyc II 1340 Appendix G
Oct 08 G-1
G. SUPPORTED PRINTERS
The AccuPyc provides support for a USB printer and includes the following printer drivers:
• Canon Bubble Jet
• Epson ESCP
• Epson ESCP Raster
• Epson ESCP2
•HP PCL 3
•HP PCL 6XL
• Postscript
Printers capable of interface with the Gemini analyzer:
• must be USB 2.00 (or newer)
• must have a printer language supported by one of the printer drivers listed above
• cannot be host-based
Printers that do not meet these criteria will not interface properly with the analyzer. Refer to
your printer manufacturer’s user manual if you encounter problems.
The printer driver is selected using Set Up > Report Options. Press
ENTER until the
Printer? prompt is displayed, then
CHOICE until the appropriate printer driver is displayed.
To Next Page
Loading...
