Specifications AccuPyc II 1340
1-8 Aug 2013
Specifications
The AccuPyc II 1340 Pycnometer has been tested to meet the specifications in the following table.
Characteristic Specification
Environment
Temperature: Stable between 15 and 35 ºC (59 to 96 ºF)
Temperature-controlled AccuPyc: temperature stability is dependent
upon specifications of the installed circulator. Recommended range: 15
to 50 ºC (59 to 122 ºF)
Humidity:
20 to 80% relative, non-condensing
Physical
Height:
17.9 cm (7.0 in.); analysis modules for 1-, 10-, and 100-cm
3
units, and
control module
25.9 cm (10.2 in.), 350 cm
3
analysis module
43 cm (17 in.), 2000 cm
3
analysis module
Width: 27.3 cm (10.7 in.), control module
22.2 cm (8.7 in.), analysis module
27 cm (10.6 in.), 2000 cm
3
analysis module
Depth: 36.2 cm (14.3 in.)
Weight:
9.3 kg (20.5 lbs), control/analysis unit (1-, 10-, and 100-cm
3
units)
7.9 kg (17.4 lbs), analysis module (1-, 10-, and 100-cm
3
units)
10.5 kg (23.2 lbs), analysis module (350-cm
3
unit)
3.6 kg (8.0 lbs), control module
26 kg (57.0 lbs), 2000 cm
3
analysis module
Electrical
Voltage: 90 to 264 VAC
Power: 30 VA
Frequency: 50 to 60 Hz
To Next Page
Loading...
