AccuPyc II 1340 Equipment Description
Aug 2013 1-7
Large-Volume Core Pycnometer
The AccuPyc Large-Volume pycnometer sample chamber has been designed to address the specific
needs of operations that require pore volume knowledge of intact drilling cores. This instrument elimi-
nates the need to break core samples into smaller pieces prior to being analyzed.
The large-volume core pycnometer:
• Has a large sample chamber with a volume of approximately 2000 cm
3
.
• Has a sample chamber can accommodate a 95 mm (3.74 in.) diameter core of up to
278 mm (10.9 in.) in length.
FoamPyc
A FoamPyc option for measuring open- and closed-cell foam materials is available in the following
configurations for the standard and temperature-controlled pycnometers:
• 100-cm
3
nominal cell volume (recommended)
•10-cm
3
nominal cell volume
This unit can be ordered initially with the FoamPyc application installed, or if you have a standard
AccuPyc, you can upgrade with a software enhancement via USB media.
MultiVolume Inserts
A MultiVolume option allowing you to analyze smaller-sized samples with your current AccuPyc
model is available for the following configurations:
•1-cm
3
nominal cell volume, contains a 0.1 cm
3
cup
•10-cm
3
nominal cell volume, contains 1- and a 3.5-cm
3
cups
• 100-cm
3
nominal cell volume, contains 10- and 35-cm
3
cups
• 2000-cm
3
nominal cell volume, contains 650- and 1300-cm
3
cups
Each kit includes appropriate insert(s), reference standard(s), and sample cup(s). Instructions for using
multivolume inserts are located in MULTIVOLUME INSERTS, page J-1. Refer to ORDERING
INFORMATION, page 6-1 for additional information.
Multigas Option
The Multigas Option enables you to connect up to four gases to one analyzer. Installation and opera-
tion instructions are provided in MULTIGAS OPTION, page K-1. Refer to ORDERING
INFORMATION, page 6-1 for details on placing an order.
To Next Page
Loading...
