Appendix I AccuPyc II 1340
I-2 Nov 06
Table I-1. Alternate Functions (continued)
Table I-2. Standard Key Functions
Function Key Sequence Used To
Keypad Keyboard
Transmit
Alt + 3Ctrl + T
Transmit analysis or calibration data over the
serial line. Transmit a partial report if an
automatic operation is in progress.
Unit
Alt +
CHOICE +
[unit number
N/A
Select the unit you wish to use (when
multiple analysis modules are attached).
You must use the analyzer keypad for this
function.
Zero
Alt + 0Ctrl + Z
Zero the pressure transducer.
Keypad Keyboard Used To
CHOICE Ctrl + N
Display the next message when in display
mode.
Display the next multiple choice item when in
a command mode.
CLEAR Ctrl + X
Clear a message when in display mode.
Clear an entry when in a command mode.
ENTER Enter or Ctrl + M
Complete an entry or begin an action
SAVE Ctrl + W
Save the information you entered and return to
display mode.
To Next Page
Loading...
