Micromeritics AccuPyc II 1340 - Page 39

AccuPyc II 1340 Pycnometer Keypad
Aug 2013 3-5
Table 3-1. Standard Keys
Key Used To
0 through 9 Enter the numbers 0 through 9
. (decimal) Enter a decimal point, a dash for sample or instrument ID, a slash
for date, or a colon for time
ENTER
Complete an entry or begin an action
CHOICE
Display the next message when at the Reload prompt.
Display the next multiple choice item when in a command mode.
CLEAR
Clear a message when at the Reload prompt.
Clear an entry when in a command mode.
SAVE
Save the information you entered and return to the Reload prompt.
Alt key
The Alt key changes the keypad mode. The keypad may be used in
either primary function mode or alternate function mode.
When you press the
Alt key to enter alternate function mode, a plus
sign (+) appears in the upper right corner of the display and the
commands written above the keys become available.
When you complete the operation accessed using the
Alt key, you
automatically exit the alternate mode and return to the Reload
prompt.
If you press the
Alt key by mistake and do not wish to use the
alternate functions, simply press
Alt again to exit the alternate
mode and return to the Reload prompt.