Reviewing Data AccuPyc II 1340
4-10 June 2013
4. Press Enter on your computer keyboard; a window containing the serial numbers of the
attached unit(s) is displayed.
5. Click on the serial number of the unit containing the data you wish to review; a window
displaying the data files for the last five analyses, and for the zero (slope) and volume
offset files is dispalyed.
The files are in html format and are assigned the name used as the Sample ID. If sample
identifications are not used, the name “Untitled” is assigned and is appended numerically
for each file (as shown in the last two entries of the above example).
Untitled indicates sample
identifications were not used.
To Next Page
Loading...
