LVS-95XX Series Barcode Quality Station Operations Manual
LVS-95XX Series Barcode Quality Station Operations Manual - English Page 14 of 94
Symbology Supported Standard(s)
GS1 Databar Expanded Stacked ISO 24724 & GS1 General Specifications
GS1 Databar Expanded Stacked CC-A ISO 24724, ISO 24723 & GS1 General Specifications
GS1 Databar Expanded Stacked CC-B ISO 24724, ISO 24723 & GS1 General Specifications
GS1 Data Matrix ISO 16022 & GS1 General Specifications
Data Matrix ISO 16022
PDF-417 ISO 15438
Micro PDF-417 ISO 24728
QR Code 2005 ISO 18004
Micro QR Code 2005 ISO 18004
Aztec ISO 24778
Laetus Pharmacode Laetus
MaxiCode ISO 16023
Han Xin Draft AIM Specification
Additional Notes
• GS1 General Specifications can be obtained by contacting your local GS1 office.
• ISO Symbology Standards can be obtained from this link:
http://www.iso.org/iso/en/CatalogueListPage.CatalogueList?ICS1=35&ICS2=40&ICS3=&scopelist=
• AIM Symbology Standards can be obtained from this link: https://www.aimglobal.org/estore/
In addition to adherence to the symbology specifications, the LVS-95XX systems comply with the
following standards:
• ISO 15415 - Barcode print quality test specification - Two-dimensional symbols
• ISO 15416 - Barcode print quality test specification - Linear symbols
• ISO 15426-1 - Barcode verifier conformance specifications - Part 1: Linear symbols
• ISO 15426-2 - Barcode verifier conformance specification - Part 2: Two-dimensional symbols
To Next Page
Loading...
