LVS-95XX Series Barcode Quality Station Operations Manual
LVS-95XX Series Barcode Quality Station Operations Manual - English Page 88 of 94
Software Version History
This report historically lists all software changes generated by the factory throughout the years. It lists when
the change was performed, the software version number, and a simplified explanation of what was
performed.
Audit Trail Report
This report lists the Operator ID along with the date/time and states what action was being taken. The Audit
trail is updated every time the software detects an administrative change; this includes the following:
• When an operator logs on or off
• When the entire program is started or stopped
• Changes to the configuration of the Setup Tab screen (such as time-outs)
• Database changes
• Calibration time outs
• Changes in permission levels
• Calibration
• Creation or deletion of an operator
Calibration Report
This report lists every time calibration was achieved along with a date/time stamp and who performed it. If
there are any problems or questions, this report allows the operator to view exactly what the calibration
process did and why.
Reference Report
This report contains all verification reports for a given reference. The reference name (free form text) is
entered in the Reference box located on the Setup Screen.
After clicking this button, only the reports for that reference are displayed and can be exported by clicking the
Export reference data button.
Export Reference Data
The Reference report is a text file that can be placed into another database file if desired. Clicking this button
sends the Reference report to another file.
After clicking this button, the Save As window appears. Select the desired file location and name, and then
click the Save button.
Note: Within this report a vertical bar, instead of a comma, is used to separate the data.
To Next Page
Loading...
