LVS-95XX Series Barcode Quality Station Operations Manual
LVS-95XX Series Barcode Quality Station Operations Manual - English Page 45 of 94
Data Matrix Calibrated Conformance Test Card
The ISO/IEC Data Matrix and GS1 Data Matrix Calibrated Conformance Test Card was developed as part of
the overall development of the “2D Judge”; IT IS NOT A CALIBRATION CARD. The purpose of the card is
to “verify the verifier” in order to prove that the verifier correlates with the results reported by the “2D Judge”
within the tolerances stated in ISO 15426-2.
The purchase of the Data Matrix Calibrated Conformance Test Card is optional. If you wish to purchase a
card, please contact Microscan or a Microscan representative.
IMPORTANT: Please read the document entitled “Read Me First” included with the Data
Matrix test card as it provides detailed instructions about the test card.
Purchased cards are certified for up to 2 years from the “in service” date and no more than 4 years from the
“date processed”, both of which are shown on the card.
ISO/IEC Data Matrix and GS1 Data Matrix Calibrated Conformance Test Card
To Next Page
Loading...
