16 NDT-2000 User's Manual
How to Repack Your Film Digitizer for Shipping
To ship back your NDT-2000 for repairing, maintenance services, or other
reasons, in order to not damage your NDT-2000, it is strongly recommended that
using the original carton and other packing materials. Follow the steps below to
repack your NDT-2000 correctly.
1. Wrap the digitizer with its packaging
plastic bag, and then insert it into one
foam support.
2. Cover down the other foam support on the
top of the digitizer.
3. Turn over the digitizer and lie it at as the
picture shown.
To Next Page
Loading...